ghcsng
DLL-C-P01 HEAT PIPE SOLAR THERMAL COLLECTOR(solar collector) 1. Vacuum tube with heat pipe 1.1. Three target solar vacuum tube, size: 蠁58 x 1800mm 1.2. Heat pipe: 1.2.1. Condenser size: 14mm, length: 60mm, wall thickness: 0.8mm 1.2.2. Body diameter: 8mm, length: 1700mm, wall thickness: 0.6mm 1.3. Heat transfer fluid: anti-freeze fluid (water-glycol) 1.4. Aluminum fin: whole piece aluminum sheet, length: 1600mm, thickness: 0.2mm 1.5. Sealing plug: silicone rubber with stainless steel 2. Manifold casing: 2.1. Material: aluminum alloy, thickness: 2.0mm 2.2. End cover: nylon plastic parts 2.3. Manifold anti-water ring: silicon rubber 2.4. Collector anti-water ring: silicon rubber 3. Header pipe 3.1. Red copper pipe, diameter: 35mm thickness: 1.0mm assemble with 14mm condenser 3.2. Red copper pipe, diameter: 42mm thickness: 1.0mm assemble with 24mm condenser 4. Insulation: Rock wool, thickness: 45mm, density: 50Kgs/m鲁 5. Water inlet and outlet / connections鈥?material & size: Brass, G1/2鈥?or G3/4鈥?male thread 6. Bracket: 6.1. Material: aluminum alloy, thickness: 2.0mm 6.2. Bracket angle: 0掳~ 45掳 7. Tuber supporter: adjustable nylon plastic parts(sliding type) Model codeVacuum tube sizeEffective area (M虏锛?/p>Capacity (L/Day/60鈩冿級Carton size(cm) (water tank)Carton size(cm) (vacuum tube)Carton size(cm) (bracket+tank supporter)CBM(M鲁锛? Per setLoading quantity 20GP40HQ DLL-C-P01-15桅58-1800 Heat pipe Aluminium fin 1.40150L129*25*181*15Pcs (195.5*33.5*23.5)212*10*100.21124325 DLL-C-P01-201.87200L166*22*122*10Pcs (195.5*33.5*16)212*10*100.2894247 DLL-C-P01-252.35250L205*26*1210Pcs (195.5*33.5*16) +15Pcs (195.5*33.5*23.5)-0.3380210 DLL-C-P01-302.80300L240*26*123*10Pcs (195.5*33.5*16)-0.3966174 * Test pressure & working pressure: 9 bar & 6 bar * Heat pipe anti-freezing: 锕?35鈩?/p> * Custom made is available Features 1. Solar keymark certificated 2. No water in vacuum tubes, each vacuum tube works individually, so solar collector can still work even several tubes break. 3. Even the environment鈥檚 temperature is extremely low(-35鈩?, solar collector can still work regularly. 4. Heat energy transferred by vacuum tube with aluminium fin & heat pipe rapidly. 5. Collector can fit with many kinds of installation environment because of the rational designed bracket. Advantages 1. Pressurized and automatically working, hot water with pressure make you comfortable when you have bath. 2. Medium circulation, have good anti-freezing and prevent evaporation ability, also avoid blockage in the pipe because of the pipe scale. 3. Multifunction: Bathing, washing, domestic heating etc. 4. Centralized water supply, designed for commercial solar water heating applications, such as swimming pool, hotel, school, hospital and so on. 5. Low operation cost, one-time investment thus saves lots of expenditure. 6. Easy installation and maintains. Stagnation and Overheating Stagnation refers to the condition that occurs when the pump stops running, due to pump failure, power blackout, or as a result of a high tank temperature protection feature built into the controller, which turns the pump off. If a PTRV is installed on collector inlet or outlet the collector will continue to increase in temperature until the limit of the temperature relief valve is reached, at which point hot water will be dumped from the system. If a PTRV is not installed on the collector, steam will form in the header. Eventually some steam may feed back to the storage tank via the return line. The PTRV on the tank will open to release pressure or heat as required. Under such conditions the manifold will normally reach a maximum temperature of around 160鈩?3-20鈩? Generally the heat returning from the collector in the form of steam is not enough to affect a continued increase in tank temperature (ie. Heat input
- Creado: 13-10-20
- Última sesión: 13-10-20